Im changing belt on my mk2 1.2 8v, got camshaft lined up, and crankshaft mark is easy to see on the pulley, but the Haynes manual shows a "notch" cut out on the alloy of the engine (oil pump i think) at about 8 oclock but there is no notch in mine.
How to change the time on a fiat punto hlx 16v it is 2002 model. Posted by Richard on Oct 21, 2013. Want Answer 0. Clicking this will make more experts see the
Yes I have Haynes manual and for 16 v there is no timing marks. And to set correct timing all 4 pistons must be in same line and then lock the valves. Your procedure probably is for 1.2 8v This item: Engine Timing Tool Set Fiat 1.2 8v And 1.4 16v. £7099. +. Silverline Clutch Alignment Tool Universal (631811) £914. +. LEXIVON Swivel Socket Set, Impact Universal Joint 1/2" 3/8" and 1/4" U-Joint 360° Rotation Drive Ball Spring Design, can cooperate with Electric Wrench, Ratchet Wrench and Manual Wrench (LX-113) £1499. Total price:
Help please guys! Changing the cam belt on my hgt today and came across a problem. The exhaust cam wheel has a timing mark but the inlet cam wheel has no visible timing mark to line them up together to get the timing right. Any advice would help thanks in advance.
Hi all, I am in the process of finishing off a head gasket change on a 1.2 16v punto sporting, I have timed it up using the correct locking tools etc. After fitting the timing belt tensioner and aligning the slot correctly, I noticed that when i turn the engine over by hand the alignment mark There is a lot of info about the Fiat 1,2-8V engine, to be found on the internet. The engine is used in countless models, like the Uno, Ritmo/Strada, 127, Punto, Bravo/Brava, Fiorino and on and on and on Just got my car back up and running 2 weeks ago, from the cambelt breaking and bending 8 valves! :mad::bang:, but now it has broken down again, this time the same thing is happening from when i broken down before my cam belt snapped, its misfiring and the engine is moving and does not sound

Messages. 8. Points. 1. Sep 30, 2020. #1. hi all im new to puntos but not new to timing belts. i have a fiat punto easy, its a 1.2 8v 2012 that runs up to 2018 and it was running before i changed the belt now im having issues after changing the timing belt its almost like i have a tooth or two out as its turning over and you can just here that

The timing belt you are trying to set up here controls the cam timing. That locks the crankshaft and camshaft together to make sure the valves open and close at the right time. The 2deg BTDC you've heard about refers to ignition timing, that is the stage at which the distributor fires the spark. That is set (as mentioned above) by adjusting the

Technical timing marks for timing belt Thread starter whiterose; Technical Fiat Punto HGT 1.8 16V VFD timing belt replacement video. jonik; May 17, 2022; Replies 0
Remove number one spark plug.Rotate engine hand and cam separately until piston is at top for number one cylinder and ignition rotor is aligned at number on hole. Now you can install timing belt. Rotate engine by TWO crankshaft resolutions. Recheck timing marks. Now perform compression testve to with all spark plugs out on all cylinders.
Points. 4. Jan 9, 2011. #1. Is the Clutch Change on a 1.4 16v 2004 likely to be more expensive than on an 8v..I can't see any posts specifically relating to the cost of a Clutch change on the bigger engine. Also the Fiat Service Book says the Timing Belt should be changed at 5 years ( which I am one year over) or 72000 miles which I am well please help me with timing and timing marks on fist palio 1.6 sport 16v - Cars & Trucks question punto-ii/32254-1-2-8v-timing-marks fiat punto 1,4 16v emotion MLaqpA.
  • h3r7kpik8a.pages.dev/377
  • h3r7kpik8a.pages.dev/113
  • h3r7kpik8a.pages.dev/60
  • h3r7kpik8a.pages.dev/144
  • h3r7kpik8a.pages.dev/522
  • h3r7kpik8a.pages.dev/421
  • h3r7kpik8a.pages.dev/167
  • h3r7kpik8a.pages.dev/376

    • fiat punto 1.2 16v timing marks